Replica Airsoft G36C Keymod BlowBack (Specna Arms)

Replica of the SA-G11 KeyMod EBB Rifle

The renowned airsoft brand Specna Arms presents the SA-G series! The SA-G replicas, with their level of workmanship, can confidently compete with replicas from the best manufacturers. The G series includes rifles in several interesting configurations, including models equipped with an integrated scope, collimator, bipod, or foregrip in the KeyMod system.

The replica, like the original, is made of highly durable polymer, metal, and steel in the most critical areas (so all screws, pins, and the tactical suspension bracket are made of steel). The replica is equipped with a 22mm front RIS rail (top and bottom) as well as a KeyMod mount (on the sides). The foregrip also houses a rechargeable battery.

The replica features a very good fit, made from a visually pleasing matte polymer. Key components are connected by pins, allowing individual elements such as the magazine slot to be replaced. Made of durable polymer, the body of the replica features an individual serial number, manufacturer markings, and aesthetic markings for the fire selector. The rear of the replica features a classic carrying handle with a 22mm RIS rail and fixed, adjustable sights. The replica is equipped with a side-folding stock, which facilitates transport and operation in confined spaces. The replica's metal barrel is finished with a flash suppressor mounted on a 14mm CW thread.

The heart of the replica is a reinforced V3 LiPo Ready gearbox. The construction is fully modifiable and compatible with standard parts, allowing the replica to be adjusted as desired. Instead of the classic contact block, the replica uses a microstick. This trigger mechanism improves the mechanism's response to trigger presses, eliminates the possibility of contact burnout, and increases the rate of fire.

The replica has been fully adapted for use with LiPo and LiFe batteries. With a basic muzzle discharge rate of approximately 380 FPS guaranteed by the factory-installed mainspring, the replica is perfectly suited for medium-range operations.

The replica uses the Enter & Convert(TM) quick-change spring system. To access the gearbox, simply unscrew the pin located at the flask latch, then remove the flask locking piece. This provides access to the mainspring guide, which can be quickly and easily removed from the rear of the gearbox. This allows for quick and efficient adjustment of the replica's power to the expected conditions on the playing field without the need for access to a workshop or a range of specialized tools. A complete spring change takes 45 seconds and requires only a screwdriver.

The replica, like the original, is designed to be used by both right- and left-handed users thanks to the double-sided fire selector.

The replica features an interesting solution in the form of the EBB (Electric Blow Back) system. This system relocates the breech, increasing realism by bringing it closer to its flammable counterpart. This system can be easily deactivated by unscrewing the special guide that connects the piston to the dummy slide.

A Hi-Cap magazine with a capacity of 350 rounds is included in the kit.

Each replica undergoes a zero inspection while still at the factory, confirmed by a special certificate with a hologram and an individual serial number assigned to each replica.

The kit does not include a battery or magazine.

The kit includes:
- replica
- magazine
- extra M90 main spring
- instruction manual
- certificate